***DUE TO SEVERE WINTER WEATHER, SHIPPING OF EMULSION IS CURRENTLY DISABLED***
XENON 902QDC Emulsion is a fast-drying Dual Cure photo emulsion. 902QDC is resistant to both solvent and water and can be used with all ink systems. Diazo is added in the normal way by first adding room temperature water, agitating before adding the solution to the emulsion, then allowing the emulsion to stand for at least 30 minutes to assure any air bubbles introduced during mixing are released. Reclaiming 902QDC is easy with Xenon Stencil Remover, which is available in paste and liquid form. Diazo Sensitizer is included in the package.
Exposure: Distance for the exposure should be about one and a half times the diagonal measurement of the artwork from point light sources. Yellow and orange mesh requires at least 50% more time than white mesh. The times given below are based on white mesh at approximately 40 inches.
METAL HALIDE: 60 sec. / 3000 WATTS CARBON ARC: 75 sec. / 60 AMPS FLUORESCENT TUBES: 240 sec. / 40 WATTS Avoid freezing and heating
COLOR: Blue / Lavender SOLIDS: 40% VISCOSITY: 6000 CPS AT 20 RMP-26C