ON ORDERS OF $250 OR MORE!*
Gem-Zyme Emulsion Remover
GEMZYME is designed for removal of all photopolymer, diazo, and capillary film emulsions. GEMZYME will immediately liquify and break down the emulsion and dramatically increase the speed of the reclaim procedure. This is an super concentrated cleaner. When used in full strength, it immediately attacks the emulsion. GEM-ZYME is safe on all types of mesh and is drain acceptable to a treatment plant, after soil release, when used as directed.
*Contains natural enzymes to help degrade the emulsion*
- Apply GEM-ZYME by spray or wipe application, or in a dip tank. Use in concentrated form or at a dilution of 1 part product up to 20 parts water.
- After removal of ink, blockout and tape, apply GEM-ZYME to both sides of a wet screen. Wait 10 seconds or more, depending on the dilution factor.
- High pressure water rinse both sides until emulsion residue is gone.
WARNING: Never allow any emulsion remover to dry on your screen, as this can "lock" the emulsion and make it very difficult, sometimes impossible to remove. If emulsion remover needs to sit on your screen longer, simply keep misting it with water or emulsion remover to keep it from drying on your screen.