Instructions Dark garments. Direct printing. 100% cotton or cotton/polyester.* Stencils: Use any direct emulsion or capillary film compatible with plastisol inks. Additives: Maxopake inks are supplied ready to print. If necessary to reduce viscosity, use up to 15% by weight, of Reducer/Detackifier (PLRE-9000). For printing transfers, mix Maxopake with with 5-10% Hot Split Additive (PLUE-9040). Printing Instructions: Multiple strokes may be required when printing by hand. When printing with automatic presses use a slightly rounded squeegee to print a thicker ink layer. A soft pad on the printing pallet will minimize penetration into the garment and improve opacity. Curing Instructions: These inks will fully cure when the entire thickness of the ink deposit reaches 300°F (149°C).